* feat(mcp): store oversized text results as artifacts
* feat(mcp): fix doc
* fix(mcp): preserve raw MCP payload in text artifacts
* fix(mcp): avoid leaking large text when artifact persistence fails
* chore(mcp): clarify inline text limit and cover artifact edge cases
* feat: add load_image tool for local file vision
* fix: address load_image PR review feedback
- Exclude load_image from sub-agent tools via Unregister after Clone,
since RunToolLoop does not call resolveMediaRefs
- Add ToolRegistry.Unregister() method
- Fix scope collision: use channel:chatID instead of filename
- Add channel/chatID context resolution matching send_file pattern
- Add comment explaining iteration > 1 guard on resolveMediaRefs
- Remove emoji from ForUser for consistency with send_file
- Add load_image_test.go
* feat: enable load_image for subagents via MediaResolver in RunToolLoop
Instead of removing load_image from sub-agent tools (28f69e71), inject a
MediaResolver into the legacy RunToolLoop fallback path so media:// refs
are resolved to base64 before each LLM call — matching the main agent
loop behavior.
- Add MediaResolver field to ToolLoopConfig and call it on iteration > 1
- Add SubagentManager.SetMediaResolver() and wire it through runTask
- Remove ToolRegistry.Unregister() (no longer needed)
- Restore load_image in sub-agent tool set (revert Clone+Unregister)
- Add TestSubagentManager_SetMediaResolver_StoresResolver
* refactor(load_image): remove prompt parameter from tool schema
* test(tools): add success-path test for LoadImageTool
Add TestLoadImage_SuccessPath that creates a real PNG file with valid
magic bytes, calls Execute with WithToolContext, and verifies:
- result.IsError == false
- ToolResult.Media contains a media:// ref
- ToolResult.ForLLM contains the [image: marker
- media ref is resolvable in the store
Add explanatory comment in loop.go for why Media and ArtifactTags
coexist on non-ResponseHandled tool results (e.g. load_image).
* fix: preallocate slice in tests and add ResponseHandled guard in toolloop
Fix prealloc linter failure in load_image_test.go.
Prevent double-resolving media by checking ResponseHandled in toolloop.go.
* Register TTS tool if provider is available
---------
Co-authored-by: Reusu <admin@yumao.name>
Co-authored-by: 美電球 <hoshina@evaz.org>
- Add `reaction` tool that reacts to a message (defaults to current inbound message via context)
- Extend `message` tool with optional `reply_to_message_id` parameter
- Introduce `WithToolInboundContext` to inject inbound message IDs into tool execution context
- Surface `MessageID` and `ReplyToMessageID` in `processOptions` for tool-surface consumption
Refs #2137
When the message tool sent to a different chat (e.g., a group), the
agent's final response to the originating chat was incorrectly skipped
because HasSentInRound() was a simple bool that didn't distinguish
targets. Replace with HasSentTo(channel, chatID) that tracks all
send targets per round and only suppresses when the target matches.
Fixes cross-conversation message causing "Processing..." to hang.
The agent path now publishes to outbound bus directly (since #2100),
making the deliver=true direct-to-bus shortcut and the directive type
prompt wrapping redundant. All cron jobs now uniformly route through
the agent. This is an intentional behavior change: old jobs with
deliver=true will execute through the agent instead of bypassing it.
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* fix(cron): publish agent response to outbound bus for cron-triggered jobs
When a cron job triggers agent execution via ProcessDirectWithChannel,
the agent response was silently discarded — the code assumed AgentLoop
would auto-publish it, but SendResponse is false on this path.
Delegate to PublishResponseIfNeeded (exported from AgentLoop) so the
response reaches the originating channel (e.g. Telegram) only when the
message tool did not already deliver content in the same round.
Also adds a "directive" message type to CronPayload, allowing cron jobs
to instruct the agent to execute a task rather than echo static text.
* fix(cron): add type validation and directive test coverage
Address reviewer blocking feedback:
1. Server-side whitelist for `type` parameter — the `enum` in
Parameters() is only an LLM schema hint; any string was persisted.
Now `addJob` rejects values other than "message" and "directive".
2. Comprehensive test coverage for the directive code path:
- directive adds prompt prefix to ProcessDirectWithChannel
- deliver=true + directive routes through agent (not direct publish)
- directive prompt content, sessionKey, channel, chatID are correct
- invalid type is rejected; valid types ("", "message", "directive") pass
- deliver=true message type goes directly to bus (regression)
- agent error path does not trigger publish (regression)
Also merge the two UpdateJob calls in addJob into one to avoid
redundant disk I/O (non-blocking suggestion from review).
* fix(cron): remove omitempty from CronPayload.Type for consistent JSON
Empty string and "message" are semantically equivalent defaults;
always serializing the field avoids asymmetric JSON output.
* test(cron): remove redundant test, strengthen error path coverage
- Remove ExecuteJobDirectivePassesCorrectContent: its assertions on
sessionKey/channel/chatID duplicate ExecuteJobPublishesAgentResponse;
its prompt check duplicates DirectiveAddsPromptPrefix.
- Strengthen DirectiveAddsPromptPrefix with exact prompt match and
publish response assertion.
- Fix ReturnsErrorWithoutPublish: set non-empty stub response so the
test verifies the error branch early-return, not the response==""
guard.
* fix(ci): satisfy golines and gosmopolitan in cron code
Validate tool call arguments against each tool's Parameters() JSON Schema
in ExecuteWithContext() before calling Execute(). This prevents type
confusion, argument injection, and missing-field errors from reaching tools.
Validates: required fields, type matching (string/integer/number/boolean/
array/object), enum membership, nested objects (recursive), array element
types. Rejects unexpected extra properties unless additionalProperties is
set to true (for MCP tool compatibility).
Returns ToolResult{IsError: true} on failure so the LLM can self-correct.
Ref: Security Hardening > Tool abuse prevention via strict parameter validation
* fix(media): track cleanup ownership per path
Add explicit cleanup policy handling to MediaStore and count refs by path before deleting the underlying file. This prevents cleanup from removing shared files until the final ref is gone.
Refs #1886
* fix(tools): keep send_file refs forget-only
Mark send_file media registrations as forget-only so cleanup drops the ref without deleting the original workspace file.
Refs #1886
* fix(channels): declare managed media cleanup policy
Explicitly mark downloaded and managed channel media as delete-on-cleanup so media ownership is visible at each registration site.
Refs #1886
- Add hardware-banner.jpg, launcher-webui.jpg, launcher-tui.jpg (lost in
previous force push)
- Add io.LimitReader (1MB) to BaiduSearchProvider response body read
- Add no-results fallback and "Results for: ... (via Baidu Search)" header
- Add api_keys field to Brave and Perplexity tables in fr/ja/pt-br/vi
tools_configuration.md
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add BaiduSearchConfig struct and register in WebToolsConfig/defaults
- Insert Baidu Search in priority chain: DuckDuckGo > Baidu > GLM Search
- Use perplexityTimeout (30s) — Qianfan is LLM-based
- Fix response parsing: use references[] field per API spec
- Add baidu_search block to config.example.json
docs: sync configuration.md and README Documentation table across all languages
- Complete truncated configuration.md for fr/ja/pt-br/vi/zh: add Spawn
async flow diagram, Providers table, Model Configuration (all vendors,
examples, load balancing, migration), Provider Architecture, Scheduled
Tasks, and Advanced Topics links
- Add Hooks/Steering/SubTurn entries to Documentation table in all 8
READMEs (en/zh/fr/id/it/ja/pt-br/vi), ordered before Troubleshooting
- Add Baidu Search row to web search table in all 8 READMEs and
tools_configuration.md (en + 5 i18n); zh README reorders search
engines with China-friendly options first
- Add Matrix channel docs translations (fr/ja/pt-br/vi)
- Add Weixin channel to chat-apps.md and all README Channels tables
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add nil checks in NewSpawnTool and NewSubagentTool constructors to
handle nil manager gracefully. Fix spelling errors (cancelled->canceled)
and remove unused test code. Update tests to use mock spawner.
Add ActualSystemPrompt and InitialMessages fields to SubTurnConfig to enable
stateful worker context passing across multiple evaluation iterations.
Changes:
- Add ActualSystemPrompt field to separate system role from user task description
- Add InitialMessages field to preload ephemeral session history before agent loop starts
- Add Messages field to ToolResult for carrying session history (internal use, not serialized)
- Update runTurn to inject system prompt and preload history from InitialMessages
- Update AgentLoopSpawner to map new fields from tools.SubTurnConfig to agent.SubTurnConfig
This enables the evaluator-optimizer execution strategy in team tool to maintain
worker context across iterations while keeping SubTurn isolation intact.
* fix(tools): propagate tool registry to subagents via Clone
SubagentManager was created with an empty ToolRegistry and SetTools()
was never called, causing all subagent tool invocations to fail with
"tool not found". This was a regression from the multi-agent refactor.
Fix: clone the parent agent's tool registry into the subagent manager
after creation but before spawn/spawn_status registration — giving
subagents access to file, exec, web, and other tools while preventing
recursive subagent spawning.
- Add ToolRegistry.Clone() for independent shallow copies
- Call subagentManager.SetTools(agent.Tools.Clone()) in registerSharedTools
- Add tests for Clone isolation, empty clone, and hidden tool state
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix(tools): fix cron_test build error and add TTL clone test
- Fix cron_test.go:229 — replace non-existent SubscribeOutbound(ctx)
with select on OutboundChan(), matching the MessageBus channel API
- Add TestToolRegistry_Clone_PreservesTTLValue per reviewer feedback
- Add version reset note to Clone() doc comment
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
- Critical flag was declared but never acted on; non-critical SubTurns
now break out of the iteration loop when IsParentEnded() returns true
- tools.SubTurnConfig was missing Critical/Timeout/MaxContextRunes,
making those fields unreachable from the tools layer; added fields and
wired them through AgentLoopSpawner.SpawnSubTurn
- Removed subTurnResults sync.Map from AgentLoop — it was a redundant
alias for the same channel already stored in turnState.pendingResults;
dequeuePendingSubTurnResults now reads directly via activeTurnStates
- Replace hardcoded concurrencySem size 5 with maxConcurrentSubTurns constant
- Update affected tests to match new dequeuePendingSubTurnResults API
Includes JSONL session persistence (#1170), spawn_status tool, Azure provider,
credential encryption, and various fixes. SubTurn features preserved and
integrated with new spawn_status functionality.
- add a dedicated exec settings section in the config page
- support timeout and custom allow/deny regex patterns for exec
- validate custom exec regex patterns in the config API
- block cron command scheduling and execution when exec is disabled
- update tests and i18n strings for the new command settings
* feat(tools): add SpawnStatusTool for reporting subagent statuses
* feat(tools): enhance SpawnStatusTool to restrict task visibility by conversation context
* feat(tests): add Unicode result truncation and channel filtering tests for SpawnStatusTool
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* feat(tools): enhance SpawnStatusTool with task ID validation and sorting by creation timestamp
* feat(tools): update SpawnStatusTool description and parameter documentation for clarity
* refactor(tests): improve comments for clarity in ChannelFiltering test case
* fix(tools): update no subagents message for clarity and remove unnecessary locking in runTask
* fix(tools): improve description clarity for SpawnStatusTool regarding task context
* feat(tools): add spawn_status tool configuration and registration
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* fix(agent): improve subagent management for spawn and spawn_status tools
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* fix(tests): update ResultTruncation_Unicode test to use valid CJK character
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: lxowalle <83055338+lxowalle@users.noreply.github.com>
- add tools.cron.allow_command config with a default value of true
- require command_confirm only when cron command execution is disabled
- expose cron command permission and timeout settings in the config UI
- add backend tests and update i18n strings
- Add subTurnResults sync.Map to AgentLoop for per-session channel tracking
- Add register/unregister/dequeue methods in steering.go
- Poll SubTurn results in runLLMIteration at loop start and after each tool,
injecting results as [SubTurn Result] messages into parent conversation
- Initialize root turnState in runAgentLoop, propagate via context
(withTurnState/turnStateFromContext), call rootTS.Finish() on completion
- Wire Spawn Tool to spawnSubTurn via SetSpawner in registerSharedTools,
recovering parentTS from context for proper turn hierarchy
- Refactor subagent.go to use SetSpawner pattern
- Add TestSubTurnResultChannelRegistration and TestDequeuePendingSubTurnResults
* fix: safety guard incorrectly blocks commands with URLs
The absolutePathPattern regex was matching URL path components like
//github.com as file system paths, causing commands containing URLs
to be incorrectly blocked by the workspace restriction safety guard.
For example, 'agent-browser open https://github.com' would be blocked
because //github.com was treated as an absolute file path outside
the working directory.
The fix adds a check to skip any path match that starts with '//',
as these are URL path components, not file system paths.
Fixes#1203
* fix: handle file:// URIs correctly in safety guard
The previous fix skipped all paths starting with '//', which incorrectly
also skipped file:// URIs that could escape the workspace sandbox.
Changes:
- Only skip '//' paths when preceded by web URL schemes (http:, https:, ftp:, etc.)
- file:// URIs are now properly checked against workspace boundaries
- Added TestShellTool_FileURISandboxing to verify the fix
Fixes security issue raised by @alexhoshina in PR #1254
* style: fix gofumpt formatting
* fix(safety-guard): use exact match position to prevent URL exemption bypass
Using strings.Index(cmd, raw) always returned the first occurrence of the
matched substring, allowing a bypass where the same //path appeared both
inside a URL and as a standalone shell path (e.g. echo https://etc/passwd
&& cat //etc/passwd would skip the second match).
Switch to FindAllStringIndex so each match is evaluated at its actual
position in the command string.
Adds TestShellTool_URLBypassPrevented to cover the exploit scenario.
* feat(web_search): add load balance and failover for api keys
* feat(web_search): add load balance and failover for api keys
* lint
* new iter to get api key
* deleted conflicts
Fixes#1126
Go type assertions return true for zero values, which caused recurring
cron jobs (every_seconds/cron_expr) to silently become one-time 'at' tasks
when LLMs filled unused optional parameters with default values (0).
Changes:
- Add validity checks after type assertions: atSeconds > 0, everySeconds > 0, cronExpr != ""
- This ensures zero values are treated as 'not set' rather than valid schedule values
- Recurring tasks like "remind me every 2 hours" now correctly create recurring jobs
* feat(feishu): implement SendMedia and add send_file tool
Add outbound media support for the Feishu channel so the agent can send
images and files to users via the MediaStore pipeline.
Feishu channel:
- SendMedia dispatches media parts as image or file uploads
- sendImage uploads via Image.Create then sends image message
- sendFile uploads via File.Create then sends file message
- feishuFileType maps extensions to Feishu file_type values
send_file tool:
- New tool lets the LLM send a local file to the current chat
- Validates path, registers file in MediaStore, returns media ref
- Agent loop wires tool registration, MediaStore propagation, and
context updates
Tested on Radxa Cubie A7A (arm64) with Feishu websocket channel.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix(agent): publish outbound media regardless of SendResponse flag
The SendResponse flag controls whether the agent loop publishes the
final text response (callers that publish it themselves set this to
false). However, the media publish path was also gated behind this
flag, which meant tool-produced media was silently dropped for normal
channel messages.
Media should be published immediately when a tool returns media refs,
independent of how the text response is delivered.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix(tools): use magic-bytes MIME detection and add file size limit to send_file
- Replace hardcoded extension-to-MIME map with h2non/filetype (magic
bytes) + mime.TypeByExtension fallback, consistent with the vision
pipeline in resolveMediaRefs
- Add configurable max file size check (defaults to config.DefaultMaxMediaSize,
20 MB) to prevent oversized uploads
- Add tests for magic-bytes detection, extension fallback, size limit,
and default max size
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor(agent): add ForEachTool to AgentRegistry for cross-agent tool lookup
Extract the pattern of iterating agents to find a named tool into
AgentRegistry.ForEachTool, simplifying SetMediaStore propagation.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix(agent,tools): adapt send_file to ctx-based channel injection after upstream refactor
Replace ContextualTool interface (removed upstream) with direct ctx
reading in SendFileTool.Execute, using ToolChannel/ToolChatID helpers.
Remove updateToolContexts which is no longer needed since ExecuteWithContext
already injects channel/chatID into ctx for all tools.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat(tools): support toggling send_file tool via config
Add SendFileConfig with Enabled field to ToolsConfig, defaulting to
true. Wrap send_file tool registration in loop.go with the config
check, consistent with the pattern used by other tools.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Add TimeoutSeconds field to ExecConfig so the shell command execution
timeout can be configured instead of being hardcoded to 60s.
- Add TimeoutSeconds int field to ExecConfig in pkg/config/config.go
with json/env tags (PICOCLAW_TOOLS_EXEC_TIMEOUT_SECONDS)
- Set default value of 60s in DefaultConfig() in pkg/config/defaults.go
- Read TimeoutSeconds from config in NewExecToolWithConfig() in
pkg/tools/shell.go; falls back to 60s when value is 0 or unset
* fix: eliminate data races on shared tool instances
Signed-off-by: Boris Bliznioukov <blib@mail.com>
* fix: remove unused indirect dependency on github.com/gdamore/tcell/v2
Signed-off-by: Boris Bliznioukov <blib@mail.com>
* fix: reviewer comments improve context handling for tool execution and ensure defaults for non-conversation callers
Signed-off-by: Boris Bliznioukov <blib@mail.com>
---------
Signed-off-by: Boris Bliznioukov <blib@mail.com>
Resolve merge conflicts to keep both SearXNG and GLM Search
providers. Updated search priority order to:
Perplexity > Brave > SearXNG > Tavily > DuckDuckGo > GLM Search
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When the LLM returns multiple tool calls, they are now executed
concurrently using goroutines + sync.WaitGroup instead of sequentially.
Results are collected in an indexed slice and processed in original order
to preserve message ordering. MessageTool.sentInRound is changed to
atomic.Bool for thread safety.
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* feat(config): add GLMSearchConfig for GLM Search provider
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* test(tools): add failing tests for GLM Search provider
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat(tools): add GLMSearchProvider for web search
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat(agent): wire GLM Search config into web search tool registration
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* fix(tools): allow /dev/null redirection and add read/write sandbox split
- Remove deny pattern that incorrectly blocked redirects to /dev/null
- Expand block device write pattern to cover nvme, mmcblk, vd, xvd,
hd, loop, dm-, md, sr and nbd in addition to sd
- Add safe path whitelist for kernel pseudo-devices so workspace path
check does not reject /dev/null, /dev/zero, /dev/random, /dev/urandom,
/dev/stdin, /dev/stdout and /dev/stderr
- Add allow_read_outside_workspace config option (default true) so file
read and list tools are unrestricted while write tools stay sandboxed
Closes https://github.com/sipeed/picoclaw/issues/964
Closes https://github.com/sipeed/picoclaw/issues/965
Signed-off-by: Huang Rui <vowstar@gmail.com>
* feat(tools): add configurable allow patterns and path whitelists
- Add custom_allow_patterns to exec config so users can exempt specific
commands from deny pattern checks
- Add allow_read_paths and allow_write_paths regex lists to tools config
for whitelisting specific paths outside the workspace
- Introduce whitelistFs that wraps sandboxFs and falls through to hostFs
for paths matching whitelist patterns
- Use variadic constructor signatures to keep backward compatibility
Suggested-by: lxowalle
Signed-off-by: Huang Rui <vowstar@gmail.com>
---------
Signed-off-by: Huang Rui <vowstar@gmail.com>
* fix: return fetched content to LLM in web_fetch tool
WebFetchTool.Execute was setting ForLLM to a summary string
("Fetched N bytes from URL ...") instead of the actual extracted
text. This meant the LLM never saw the page content and could not
answer questions based on fetched web pages.
Return the extracted text in ForLLM so the model can use it.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: put full JSON result in ForLLM, summary in ForUser
Accept suggestion from afjcjsbx: the LLM should receive the full JSON
result (including extracted text) while the user sees a short summary.
Update tests to match the new field assignment.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* fix(pkg/providers):do regex precompile insteadd on the fly
* fix(providers): replace HTTP-specific regex with standalone status code matcher
The precompiled HTTP regex used uppercase "HTTP" which never matched
because ClassifyError lowercases the input. Replace it with a
case-insensitive word-boundary pattern that matches any standalone
3-digit status code (300-599), which also subsumes the HTTP/x.x case.
Add test case for standalone status code extraction.
* fix(providers): restore http regex and add standalone status code matcher
Restore the http-prefixed regex (without unnecessary (?i) flag since
input is already lowercased by ClassifyError) as a mid-priority pattern
to reduce false positives. Add a standalone word-boundary matcher as a
fallback for bare status codes like "429". Fix test to use lowercased
input matching the actual calling convention.
* perf(tools): move path regex compilation from per-call to package init
The path regex in guardCommand was compiled on every call. Hoist it
to a package-level var (absolutePathPattern) alongside defaultDenyPatterns
in a single var block, so it is compiled once at init time.
* style(tools): move inline comment to fix golines formatting error
* fix(tools): close resp.Body on retry cancel and cache http.Client instances
Fix resp.Body leak in DoRequestWithRetry where req.Body (request) was
incorrectly closed instead of resp.Body (response) on context cancel.
Cache http.Client on web search/fetch provider structs and channel
adapters (WeCom, LINE) to avoid per-call allocation overhead.
* fix(channels): preserve original http client timeouts for LINE and WeCom
Split LINE single 60s client into infoClient (10s) for bot info lookups
and apiClient (30s) for messaging API calls. Lower WeCom cached client
base timeout from 60s to 30s (matching uploadMedia), and ensure it is
always >= the configured ReplyTimeout so the per-request context
deadline remains the effective limit.
* refactor(tools): extract timeout consts and deduplicate WebFetchTool constructors
Address PR review feedback from xiaket:
- Define searchTimeout, perplexityTimeout, fetchTimeout, defaultMaxChars,
and maxRedirects as package-level consts instead of magic numbers.
- Remove misleading "No proxy" comment in NewWebFetchTool.
- Deduplicate NewWebFetchTool by delegating to NewWebFetchToolWithProxy.
* test(utils): add context cancellation test for DoRequestWithRetry
Verify that resp.Body is properly closed when the context is canceled
during retry sleep, covering the C8 resp.Body leak fix.
* fix(utils): close resp in test to satisfy bodyclose linter
* fix(utils): eliminate flakiness in context cancellation retry test
Synchronize cancellation using an onRoundTrip callback from the
transport wrapper instead of a timing-based context timeout. This
ensures the first client.Do completes before cancel fires, so
cancellation always hits during sleepWithCtx.
- MCPTool.Name(): append FNV-32a hash of original (unsanitized) server+tool
names whenever sanitization is lossy or total length exceeds 64 chars,
ensuring names that differ only in disallowed characters remain distinct
- ToolRegistry.Register(): emit warn log when a tool registration overwrites
an existing tool with the same name, making collisions observable
- scripts/test-docker-mcp.sh: switch shebang from #/bin/bash /Users/yuchou/Work/klook-calendar/klook-google-cal-sync/src/googlecalconversrv/bin/start.sh to # for portability on minimal distros and Nix environments
- Avoid logging sensitive cfg.Args in ConnectServer; log args_count instead
- Sanitize server/tool name components in MCPTool.Name() to ensure valid
identifiers for downstream providers (lowercase, [a-z0-9_-] only)
- Add slack as 5th MCP server example in config.example.json
- Move Dockerfile.full and docker-compose.full.yml into docker/ directory
for consistency with existing docker/Dockerfile and docker/docker-compose.yml
- Fix all Makefile docker-* targets to reference correct compose file paths
- Fix docker/docker-compose.full.yml build context (.. ) and volume paths
- Fix scripts/test-docker-mcp.sh compose file path and replace cowsay test
with actual @modelcontextprotocol/server-filesystem MCP server test
Avoid rebuilding the entire system prompt on every BuildMessages() call
by caching the static portion (identity, bootstrap, skills summary,
memory) and only recomputing it when workspace source files change.
Key changes:
- ContextBuilder caches the static prompt behind an RWMutex with
double-checked locking. Source file changes are detected via cheap
os.Stat mtime checks so no explicit invalidation is needed.
- Track file existence at cache time (existedAtCache map) so that
newly created or deleted bootstrap/memory files also trigger a
rebuild — the old modifiedSince() silently returned false on
os.IsNotExist.
- Walk the skills directory recursively with filepath.WalkDir to
catch content-only edits at any nesting depth; directory mtime
alone misses in-place file modifications on most filesystems.
- ToolRegistry.sortedToolNames() sorts tool names before iteration,
ensuring deterministic tool definition order across calls — a
prerequisite for LLM-side prefix/KV cache reuse.
- Merge all context (static + dynamic + summary) into a single
system message for provider compatibility: the Anthropic adapter
extracts messages[0] as the top-level system parameter, and Codex
reads only the first system message as instructions.
- Fix a data race in BuildMessages() where cachedSystemPrompt was
read without holding the lock in a debug log statement.
- Add tests: single system message invariant, mtime auto-invalidation,
new-file creation detection, skill file content change, explicit
InvalidateCache, cache stability, concurrent access (20 goroutines
x 50 iterations, passes go test -race), and a benchmark.
The spawn tool accepts empty strings as valid task arguments, which
causes a subagent to run with no meaningful work. The subagent's
completion message is then routed back to the originating channel
(e.g. Signal, Discord), where the main agent processes it and may
hallucinate an unrelated response that gets sent to users.
Validate that the task parameter is non-empty after trimming whitespace.
Related: #545
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* cleanup dead code.
Signed-off-by: Kai Xia <kaix+github@fastmail.com>
* add these two back with flag.
Signed-off-by: Kai Xia <kaix+github@fastmail.com>
* fix ci
Signed-off-by: Kai Xia <kaix+github@fastmail.com>
* remove this confusing line
Signed-off-by: Kai Xia <kaix+github@fastmail.com>
* make fmt
Signed-off-by: Kai Xia <kaix+github@fastmail.com>
* remove unused method.
picked up by golangci-lint run
Signed-off-by: Kai Xia <kaix+github@fastmail.com>
---------
Signed-off-by: Kai Xia <kaix+github@fastmail.com>
- Drain buffered messages in MessageBus.Close() so they aren't silently lost
- Replace all context.TODO() with context.WithTimeout(5s) across 7 call sites
- Fix OneBot pending channel leak: send nil sentinel in Stop() and handle
nil response in sendAPIRequest() to unblock waiting goroutines
* chore: Update default host bindings from 0.0.0.0 to 127.0.0.1 for various services and examples.
* config: Update default host bindings to 0.0.0.0 for improved Docker accessibility and add related documentation.
* refactor: reimplement filesystem tools with `os.OpenRoot` for enhanced security and simplified path validation.
* chore: revert other PR content from this branch
* docs: Update Chinese README.
* docs: Update Chinese README.
* docs: Update Chinese README.
* refactor: Reorder filesystem helper functions, extract directory entry formatting logic, and enhance `WriteFileTool`'s result message.
* feat: Enhance `mkdirAllInRoot` to prevent creating directories over existing files and add tests for directory creation functionality.
* Refactor filesystem tools to use a `fileReadWriter` interface for both host and sandboxed I/O, improving atomic writes and error handling.
* refactor: unify filesystem read/write operations with atomic write guarantees and clearer naming.
* refactor: rename `appendFileWithRW` function to `appendFile`
* refactor: unify filesystem access by introducing a `fileSystem` interface and updating tools to use it directly, removing `os.Root` dependency from `sandboxFs`.
* chore: run make fmt
* fix: `validatePath` now returns an error when the workspace is empty.
Add outbound media sending capability so the agent can publish media
attachments (images, files, audio, video) through channels via the bus.
- Add MediaPart and OutboundMediaMessage types to bus
- Add PublishOutboundMedia/SubscribeOutboundMedia bus methods
- Add MediaSender interface discovered via type assertion by Manager
- Add media dispatch/worker in Manager with shared retry logic
- Extend ToolResult with Media field and MediaResult constructor
- Publish outbound media from agent loop on tool results
- Implement SendMedia for Telegram, Discord, Slack, LINE, OneBot, WeCom
PublishInbound/PublishOutbound held RLock during blocking channel sends,
deadlocking against Close() which needs a write lock when the buffer is
full. ConsumeInbound/SubscribeOutbound used bare receives instead of
comma-ok, causing zero-value processing or busy loops after close.
Replace sync.RWMutex+bool with atomic.Bool+done channel so Publish
methods use a lock-free 3-way select (send / done / ctx.Done). Add
context.Context parameter to both Publish methods so callers can cancel
or timeout blocked sends. Close() now only sets the atomic flag and
closes the done channel—never closes the data channels—eliminating
send-on-closed-channel panics.
- Remove dead code: RegisterHandler, GetHandler, handlers map,
MessageHandler type (zero callers across the whole repo)
- Add ErrBusClosed sentinel error
- Update all 10 caller sites to pass context
- Add msgBus.Close() to gateway and agent shutdown flows
- Add pkg/bus/bus_test.go with 11 test cases covering basic round-trip,
context cancellation, closed-bus behavior, concurrent publish+close,
full-buffer timeout, and idempotent Close
* feat: integrate Tavily search
* fix: set include_raw_content to false in Tavily search as wealready get relevant data inside content
* refactor: update Go type declarations to `any`, apply formatting fixes.
Add comprehensive unit tests for the ToolRegistry covering registration,
lookup, execution, context injection, async callbacks, schema generation,
provider definition conversion, and concurrent access.
Fix a defensive edge case in Truncate where a negative maxLen would cause
a slice bounds panic, and add table-driven tests covering boundary
conditions, zero/negative lengths, and Unicode handling.
Co-authored-by: Cursor <cursoragent@cursor.com>
CallTool can return (nil, nil) if the underlying MCP library misbehaves.
Without a nil check, result.IsError would panic. Return an explicit error
ToolResult instead.
Implements SearXNG as a third web search provider to address Oracle Cloud
datacenter IP blocking issues and provide a cost-free, self-hosted alternative
to commercial search APIs.
Changes:
- Add SearXNGConfig struct with Enabled, BaseURL, and MaxResults fields
- Implement SearXNGSearchProvider with JSON API integration
- Update provider priority: Perplexity > Brave > SearXNG > DuckDuckGo
- Wire SearXNG configuration through agent tool registration
- Add default config values (disabled by default, empty BaseURL)
Benefits:
- Solves DuckDuckGo datacenter IP blocking (138 bytes redirect responses)
- Zero-cost alternative to Brave Search API ($5/1000 queries)
- Self-hosted solution with 70+ aggregated search engines
- Privacy-focused with no rate limits or API keys required
- Ideal for Oracle Cloud, GCP, AWS, and Azure VM deployments
The implementation follows the existing provider interface pattern and
maintains backward compatibility with all existing search providers.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Resolved conflicts:
- pkg/config/config.go: Removed duplicate DefaultConfig() (already in defaults.go)
- pkg/config/defaults.go: Updated Temperature to *float64 (nil default)
Upstream changes included:
- Temperature changed from float64 to *float64 (nil means use provider default)
- New HeartbeatConfig and DevicesConfig
- Various agent and tool improvements
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
